The stem getting stuck in the shank is a common issue mainly caused by the accumulation of tar residues, moisture, and tobacco particles deposited between the two parts. These residues can act like a natural adhesive, making it difficult to separate the stem from the shank. Furthermore, temperature variations during use or storage can cause expansion or contraction of materials, especially if the stem is made of metal or acrylic and the shank of wood, increasing adhesion. Another cause can be improper handling or excessive force applied during disassembly attempts, which may wedge the parts even more. To prevent the stem from getting stuck, it is essential to perform regular and thorough cleaning, using specific tools such as pipe cleaners to remove internal residues and keep contact surfaces clean and dry. Additionally, it is advisable to disassemble the pipe only when it is at room temperature to avoid problems caused by thermal expansion. In case of a stuck stem, one may try soaking the affected part in lukewarm water to soften the residues, taking care not to damage the wood or other sensitive materials. If the problem persists, it is best to consult an expert to avoid irreversible damage to the pipe.<\/p>\n","protected":false},"featured_media":0,"parent":0,"template":"page-faq-new.php","meta":{"_acf_changed":false,"ep_exclude_from_search":false},"class_list":["post-101541","faq-new","type-faq-new","status-publish","hentry"],"acf":[],"yoast_head":"\n